Members Constabulary Posted September 22, 2017 Members Report Posted September 22, 2017 (edited) I´m selling these 2 vintage plough gauges. Both blades require sharpening. On either plough gauge 1 screw has a bad screw head but I´m sure you can cut a slot and solder or weld in a round or oval piece of sheet metal or even a small metal ball with hole... or the like - not a too big issue I think. maybe some of the leatehr tool dealer have spare screws... You know em - check with em. The Blanchard has measures in Inch & Centimeter and the other one only in Centimeter. See below pictures for details. 10cm / 4" Plough Gauge (Blanchard, Paris made): 200€ / $240 + 9.50€ / $12 for registered & insured worldwide Airmail shipping 15xm / 6" Plough Gauge (to me unknown maker stamp looks like a horse): 200€ / $240 + 9.50€ / $12 for registered & insured worldwide Airmail shipping If you want both I take care of the shipping costs. Shipping is trackable through USPS website Some pictures: 10cm / 4" Blanchard Plough Gauge: Edited September 22, 2017 by Constabulary ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members Constabulary Posted September 22, 2017 Author Members Report Posted September 22, 2017 6" Plough Gauge: ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members Constabulary Posted September 23, 2017 Author Members Report Posted September 23, 2017 I´m open for offers - I´m not in a hurry selling em but need some bucks for a project ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members Constabulary Posted September 26, 2017 Author Members Report Posted September 26, 2017 4" Blanchard is sold The other one could be a Meyer-Flamery mfg. and is still available. Made a mistake reg. shipping - the 6" is heavier thank the 4" So shipping to EU locations is: 15€ and worldwide 19.50€ ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members Constabulary Posted October 21, 2017 Author Members Report Posted October 21, 2017 Both plough gauges are sold ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Recommended Posts