Jump to content
bikermutt07

Tripod Stool Hardware

Recommended Posts

Hey guys I remember people asking for a better source for this part. This one looks well built. Enjoy

 

http://www.leevalley.com/us/hardware/page.aspx?p=72944&cat=3,48759&ap=1

Share this post


Link to post
Share on other sites

Thanks for sharing 

Share this post


Link to post
Share on other sites
Quote

 

I can't find it online anymore but I printed the plans years ago. A wooden staff that breaks down into 3 parts for a stool. It used copper plumbing fixtures for decoration and hidden goodies like storage and a torch. the guy used a metal ring to hold the legs. Ill photo the pages and share

found the link. check this out

http://www.instructables.com/id/Multi-Function-Walking-Stick-Converts-into-a-Cha/

Edited by Mjolnir
ps

Share this post


Link to post
Share on other sites

I can tell you from personal experience, the Lee Valley hardware is very, very good. You need 1-1/4" legs. I have a digital pattern sorted out for the seat and leg length/hole drilling dimensions if any one needs it.

Share this post


Link to post
Share on other sites

Tandy has the legs and connector as a set:

https://www.tandyleather.com/en/product/tri-leg-assembly

Share this post


Link to post
Share on other sites

Lee Valley, yup. Hahaha

 

Probably is one of my favorite wood workers stores in the Alberta capital city.

But they carry a marvelous gardening section as well. ;-)

They certainly deal in high quality merchandise.

Mr.Lee was a wise thinker. Too bad we lost him, so sad....

Chas

Share this post


Link to post
Share on other sites
3 minutes ago, ChasCS said:

Lee Valley, yup. Hahaha

 

Probably is one of my favorite wood workers stores in the Alberta capital city.

But they carry a marvelous gardening section as well. ;-)

They certainly deal in high quality merchandise.

Mr.Lee was a wise thinker. Too bad we lost him, so sad....

Chas

YOu should try the Japanese Wood carving knives. They cut leather like butter.

Share this post


Link to post
Share on other sites
23 minutes ago, Instinctive said:

YOu should try the Japanese Wood carving knives. They cut leather like butter.

Yes, and with two, you get egg roll? Haha

 

They have a few thousands of years practice. They should know how to sharpen a blade. ;-)

 

Which makes or knife brands do you prefer? Any pics to share? 

 

Chas

Share this post


Link to post
Share on other sites
5 minutes ago, ChasCS said:

Yes, and with two, you get egg roll? Haha

 

They have a few thousands of years practice. They should know how to sharpen a blade. ;-)

 

Which makes or knife brands do you prefer? Any pics to share? 

 

Chas

http://www.leevalley.com/en/wood/page.aspx?p=45740&cat=1,130,43332,43339,45740.

I have the "C" version. Going after the "D" next or one of these http://www.leevalley.com/en/wood/page.aspx?p=32502&cat=1,42936,42949

Sharp when you get it. Just strop every now and then.

 

Share this post


Link to post
Share on other sites
5 minutes ago, Instinctive said:

http://www.leevalley.com/en/wood/page.aspx?p=45740&cat=1,130,43332,43339,45740.

I have the "C" version. Going after the "D" next or one of these http://www.leevalley.com/en/wood/page.aspx?p=32502&cat=1,42936,42949

Sharp when you get it. Just strop every now and then.

 

Yes, they carry a wide variety of cutting implements. 

For me, wandering around Lee Valley Tools, is like being in a candy store.

It's something I never get tired of. ;-)

I hadn't thought of using my sharp wood carving tools, in the leather gallery.

Chas

Edited by ChasCS

Share this post


Link to post
Share on other sites

I was in there two days ago and had to keep chanting to my self "Stick to the list....don't look round....stick to the list...don't look around"... I made it.

Share this post


Link to post
Share on other sites
21 minutes ago, plinkercases said:

I was in there two days ago and had to keep chanting to my self "Stick to the list....don't look round....stick to the list...don't look around"... I made it.

You should have left the cheque book at home, and you would be safe. Haha

I know that feeling, seeing it all, in its shiny glory. Quite the display, for sure...

 

Chas

Share this post


Link to post
Share on other sites

I haven't ever been. But, the next time I'm in Dallas I plan to check out Rockler tool.

Share this post


Link to post
Share on other sites
19 hours ago, bikermutt07 said:

I haven't ever been. But, the next time I'm in Dallas I plan to check out Rockler tool.

Lee Valley, is a store unto itself. There are no equals. Only imitators. Haha

Ah, yet we say imitation is the nicest form of flattery, but the tools aren't the same.

Yes, nor the special items that are unique to Lee Valley distributors. 

Their yearly Christmas catalog, is always a delight, for sure...

http://www.leevalley.com/en/home/OnlineCatalogs.aspx

The cover pics on all of these catalogs are very special as well... Unique.

Chas

Share this post


Link to post
Share on other sites
29 minutes ago, ChasCS said:

Lee Valley, is a store unto itself. There are no equals. Only imitators. Haha

Ah, yet we say imitation is the nicest form of flattery, but the tools aren't the same.

Yes, nor the special items that are unique to Lee Valley distributors. 

Their yearly Christmas catalog, is always a delight, for sure...

http://www.leevalley.com/en/home/OnlineCatalogs.aspx

The cover pics on all of these catalogs are very special as well... Unique.

Chas

I understand all that. But aren't they in Massachusetts, Connecticut, or something like that? I only live 3 hours from Dallas.

 

Scratch that: they're in frickin Canada!

Won't be visiting there anytime soon.

Edited by bikermutt07

Share this post


Link to post
Share on other sites
30 minutes ago, bikermutt07 said:

I understand all that. But aren't they in Massachusetts, Connecticut, or something like that? I only live 3 hours from Dallas.

 

Scratch that: they're in frickin Canada!

Won't be visiting there anytime soon.

I believe they were to be opening a store location in Nevada. Perhaps in Reno?

No it appears to be in Las Vegas... ;-)

Contact Information
Lee Valley Tools USA Inc.
4625 Nevada Ave
Las VegasNV 89104
Contact:  
Title:  
Phone: (613) 596-0350
Website:  
 
Lee Valley Tools USA Inc. is the only company located at 4625 Nevada Ave, Las Vegas, NV 89104

https://www.bizapedia.com/nv/lee-valley-tools-usa-inc.html

Where are you located, situated, living??? OK.

If you can order your items from their USA location,  to Bossier City, Louisiana, it should be a breeze.

 

Chas

Edited by ChasCS

Share this post


Link to post
Share on other sites
21 minutes ago, ChasCS said:

I believe they were to be opening a store location in Nevada. Perhaps in Reno?

No it appears to be in Las Vegas... ;-)

Contact Information
Lee Valley Tools USA Inc.
4625 Nevada Ave
Las VegasNV 89104
Contact:  
Title:  
Phone: (613) 596-0350
Website:  
 
Lee Valley Tools USA Inc. is the only company located at 4625 Nevada Ave, Las Vegas, NV 89104

https://www.bizapedia.com/nv/lee-valley-tools-usa-inc.html

Where are you located, situated, living??? OK.

If you can order your items from their USA location,  to Bossier City, Louisiana, it should be a breeze.

 

Chas

Yeah, but you were talking about visiting the store. I have ordered something from them before. Oh the pica pencil. It is awesome. Great for carpenter work.

I think the Rockler store is supposed to be pretty special too.

Share this post


Link to post
Share on other sites
43 minutes ago, bikermutt07 said:

Yeah, but you were talking about visiting the store. I have ordered something from them before. Oh the pica pencil. It is awesome. Great for carpenter work.

I think the Rockler store is supposed to be pretty special too.

Ah yes the Pica pencil.

http://www.leevalley.com/US/wood/page.aspx?p=71121&cat=1,42936

Those are handy, and useful.

Chas

image.jpeg

Share this post


Link to post
Share on other sites

We don't have to visit the stores to become a loyal customer. I checked the website, to see that they indeed have a Canadian location.

http://www.rockler.com/retail/stores/ca/ontario-store

You piqued my interest, so I went ahead and requested a free catalog.  Thanks.

http://go.rockler.com/catalog.cfm

I'm always interested in learning about fine wood working tools. ;-)

 

Chas

Share this post


Link to post
Share on other sites

I'm just getting into it a little as work will allow. I have always been a field/remodeling carpenter. 

I am quickly learning about the big difference between the two and how lacking in the tools I am for enjoying the total experience.

I have made two tables this year. The first with dowel and pocket screws out of pine. The second was red oak m&t construction finished in linseed oil.

Neither are perfect in any way, but they look good with their granite tops.

Share this post


Link to post
Share on other sites
5 minutes ago, bikermutt07 said:

I'm just getting into it a little as work will allow. I have always been a field/remodeling carpenter. 

I am quickly learning about the big difference between the two and how lacking in the tools I am for enjoying the total experience.

I have made two tables this year. The first with dowel and pocket screws out of pine. The second was red oak m&t construction finished in linseed oil.

Neither are perfect in any way, but they look good with their granite tops.

What!? That wasn't in your shop pic was it? Would love to see it.

Lovin' this store info. Thanks.

Share this post


Link to post
Share on other sites
31 minutes ago, bikermutt07 said:

I'm just getting into it a little as work will allow. I have always been a field/remodeling carpenter. 

I am quickly learning about the big difference between the two and how lacking in the tools I am for enjoying the total experience.

I have made two tables this year. The first with dowel and pocket screws out of pine. The second was red oak m&t construction finished in linseed oil.

Neither are perfect in any way, but they look good with their granite tops.

A few years ago, actually several, I took a Millwork & Cabinet making course at our N.A.I.T. College.

My father was a Forman with Poole Construction. A major company here in the capital city. So I decided to learn about his profession, as he passed away when I was only 16 years old, and legally wasn't allowed to work on their job sites. So I took the course and absolutely loved it. Mortise and Tenon joints were one of the many wood joints we learned about. There are literally dozens. lap, dove tail, finger joints... Not even including what the Chinese and Japanese use.

Pictured is some incredibly precise Japanese joinery. Quite the feat...

Chas

image.jpeg

Share this post


Link to post
Share on other sites
34 minutes ago, Mjolnir said:

What!? That wasn't in your shop pic was it? Would love to see it.

Lovin' this store info. Thanks.

I work for a flooring\countertop store. These were for the showroom. I'm like the in-house carpenter, maintenance man, salesman, special projects and whatever He wants guy. 

I love it.

Chas, I don't even want to think about far east joinery. You seen where they attach beams end to end? Crazy stuff.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...