SamuelBrand Report post Posted January 12, 2018 Hello, New to the forum so thanks for the help! I recently purchased a juki lu1508 and have been trying to determine the best thread brand (bonded nylon). I have it set up for 138 top and bottom and thus far it has worked admirably, although the stitches are a little loose when turning corners. (Any thoughts on that issue are appreciated) I would also prefer to use the same brand across all my machines (artisan 3000, tacsew t111-55) does anyone recommend a specific type (techsew vs. superior, etc. m) thanks again for your collective wisdom. Cheers Quote Share this post Link to post Share on other sites
garypl Report post Posted January 12, 2018 I have only bought bonded nylon thread from Toledo Sewing (see banner ads) and I have had no problem and have not tried to buy elsewhere. If it's not broke I don't try to fix it! Gary Quote Share this post Link to post Share on other sites
SamuelBrand Report post Posted January 12, 2018 17 minutes ago, garypl said: I have only bought bonded nylon thread from Toledo Sewing (see banner ads) and I have had no problem and have not tried to buy elsewhere. If it's not broke I don't try to fix it! Gary Thank you Gary, will check them out! Quote Share this post Link to post Share on other sites
DrmCa Report post Posted January 12, 2018 I get lots of surplus (full and partial cones) American & Efird and it works very well in my Pfaff. Quote Share this post Link to post Share on other sites
SamuelBrand Report post Posted January 13, 2018 3 hours ago, DrmCa said: I get lots of surplus (full and partial cones) American & Efird and it works very well in my Pfaff. Thanks!!! Quote Share this post Link to post Share on other sites
