Airth Report post Posted January 25, 2018 I'm adding cloth liners to wallets, and everything is nice and flat when the wallet is open, but crinkles and bunches up along the folds whenever I actually close the wallet. For adhesives, I've tried Barge cement, regular rubber cement and even double-sided tape. I've even adjusted the size of the cloth liner so there isn't an excess of fabric, but for whatever reason I get the same results. Thanks in advance for everyone's insight! Quote Share this post Link to post Share on other sites
Aart Report post Posted January 28, 2018 Hi there, why not glue the flat parts of the lining fabric to carton ? Best Aart Quote Share this post Link to post Share on other sites
Norton Custom Leather Report post Posted February 1, 2018 any time you do a project that will fold, you should do said project slightly folded when in production. this will reduce the crinkle. remember the fabric will stretch Quote Share this post Link to post Share on other sites
johnv474 Report post Posted February 4, 2018 What happens if you just glue/stitch the edges of the liner, leaving the center loose? If the liner is not adhered it seems it would not be forced to bunch up. Quote Share this post Link to post Share on other sites
