Buzzard2005 Report post Posted March 13, 2018 I've made some wallets and a bunch of headphone wraps by looking at what was out there and figuring out what I wanted. With the axe sheath, I have seen a lot of knife sheaths that are wet formed and thought I would give it a shot, I have wet formed catch alls in the past and they turned out well. Any and all pointers appreciated. Quote Share this post Link to post Share on other sites
Buzzard2005 Report post Posted March 13, 2018 Here is the wet form. Quote Share this post Link to post Share on other sites
garypl Report post Posted March 13, 2018 Buzzard, I think axe sheaths are more difficult to form than most knife sheaths. I just made a cover for a double bit axe to protect the edges of the axe. Wasn’t sure how to begin so I made a paper template by tracing the axe, the cut two covers, one for each side, and used line 24 snaps to secure everything. The thickness on the blade edges is almost 3/4” - 2 layers of 8-10 oz plus the welts. Don’t think this design will work for a carry sheath, but will provide protection for the blade. Gary Quote Share this post Link to post Share on other sites
