Jump to content

Simplicity Sole Stitcher

Recommended Posts

This machine works and is complete. I need help figuring out how to adjust the thread feeding system. 

does anyone out there have one of these machines in working condition that I could talk to in order to get mine adjusted properly?

The take-up arm in the second picture moves probably 4 inches left to right...I think it is responsible for pulling the thread back tight after the stitch passes around the shuttle.

The third picture is further down the thread delivery chain, but has the same thread carrier as the take-up lever...the outer shell has 3 slots while the inner part has a thread groove.

When threading you could put the thread into a slot...go round the inner groove and exit the same slot......or any other combination of in and out.

How is this intended to work??




small 3.jpg

small 2.jpg

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...