Sticks Report post Posted August 25, 2018 (edited) Hi guys, here is my leather splitter in action. It is based on the jewelers mill. It can split (very smoothly) up to 75mm wide leather . From 5mm thick ,it can split down to 0.4mm paper thin. The blade is absolutely amazing . Blade was shaped my me from a blank and heat treated by a friend. As can be seen in the video, the blade is fully adjustable. Im now looking for a roller with horizontal grooves for the bottom to provide more grip and improved feeding. Thnx guys. SPLITTER1.mp4 SPLITTER2.mp4 Edited August 25, 2018 by Sticks Quote Share this post Link to post Share on other sites
Northmount Report post Posted August 25, 2018 @Sticks Interesting work. Can you share your plans? Tom Quote Share this post Link to post Share on other sites
ComputerDoctor Report post Posted August 25, 2018 Good way to loose a finger !!!! Sam:) Quote Share this post Link to post Share on other sites
Sticks Report post Posted August 25, 2018 1 hour ago, ComputerDoctor said: Good way to loose a finger !!!! Sam:) Haha, you couldn't even touch the blade if you wanted to.! Quote Share this post Link to post Share on other sites
Sticks Report post Posted August 25, 2018 Watch Video Watch Video I have added the videos so they can be easily viewed without the need to download. thnx Quote Share this post Link to post Share on other sites
ComputerDoctor Report post Posted August 26, 2018 5 hours ago, Sticks said: Haha, you couldn't even touch the blade if you wanted to.! I was referring to the open gears:) Quote Share this post Link to post Share on other sites
Sticks Report post Posted August 26, 2018 (edited) 7 hours ago, ComputerDoctor said: I was referring to the open gears:) Ahh, in that case for the type of person at risk of this,, my just mopped floor or a dinner knife might pose a bigger risk. There is an age limit Edited August 26, 2018 by Sticks Quote Share this post Link to post Share on other sites
Sticks Report post Posted August 27, 2018 On 8/25/2018 at 4:46 PM, Northmount said: @Sticks Interesting work. Can you share your plans? Tom Sure np. Quote Share this post Link to post Share on other sites