Jump to content
Rbarleatherworks

Southwest Trade Show 2019

Recommended Posts

Hi all

Just wondering who is going to the Southwest Trade Show in Prescott this Spring? 

I have never been but have thought about going for a while now.  Not really sure what to expect and would be nice to connect with someone before I make the big journey. 

Anyone from Canada going ?

Look forward to hearing from you,

Regan

Share this post


Link to post
Share on other sites

Now, that's a heck of an idea. No excuse not to now, being retired and all. We just went to Scottsdale last year, so I'll have to give it some thought. 

Jeff

Share this post


Link to post
Share on other sites

Any other Gals traveling alone and might like to split a room? 

I see on the Ad for the Prescott Resort & Conference Center it is $105.00 for a double.

Would be nice to keep the costs down .... then we can take more classes ! :rolleyes::yeah:

Let me know if anyone interested, feel free to PM me if you like.

Regan

Share this post


Link to post
Share on other sites

Well, that knocks me out. My wife would never go for that. :P

Share this post


Link to post
Share on other sites

Why not? Lots to do in Scottsdale that isn’t leather oriented?

Share this post


Link to post
Share on other sites

This is a good show and fun. It is a really nice facility. My wife is taking some classes for the first time (joys of retirement!). We will be set up as exhibitors at the trade show also. Stop by and say hello! 

Share this post


Link to post
Share on other sites
13 hours ago, ScoobyNewbie said:

Why not? Lots to do in Scottsdale that isn’t leather oriented?

I think he was meaning that his wife wouldn't approve to come and split the cost of a room with me ......  LOL!!!

14 hours ago, alpha2 said:

Well, that knocks me out. My wife would never go for that. :P

Oh darn ..... B) LOL!!!

Share this post


Link to post
Share on other sites
1 hour ago, bruce johnson said:

This is a good show and fun. It is a really nice facility. My wife is taking some classes for the first time (joys of retirement!). We will be set up as exhibitors at the trade show also. Stop by and say hello! 

Thanks Bruce... will do.

Hey it sounds like you have been there before.  Do you know what people usually do ... can a person fly right into Prescott and rent a vehicle to get around or ???

I ask because I was looking into Sheridan but it doesn't look like you can even fly there so I wasn't sure.  Tips of the "Trade Show" are most welcome to the newcomer

Thanks

Regan

Share this post


Link to post
Share on other sites

Rbarleatherworks,

I am not sure if you can fly directly to Sheridan anymore(I think you can on United through Denver) but you can definitely fly into Billings and rent a car.  Its about 130 miles give or take from Sheridan to Billings all on the interstate.

Todd

Share this post


Link to post
Share on other sites

Denver has flight to Sheridan, but I don't know if that would make sense from BC. Billings and drive would be a better choice.

I see that Sheridan is half the driving distance as Prescott for me from Ft. Collins, so that's a no brainer. Looks like it might be Sheridan for me. 

Jeff

Share this post


Link to post
Share on other sites
10 hours ago, Rbarleatherworks said:

Thanks Bruce... will do.

Hey it sounds like you have been there before.  Do you know what people usually do ... can a person fly right into Prescott and rent a vehicle to get around or ???

I ask because I was looking into Sheridan but it doesn't look like you can even fly there so I wasn't sure.  Tips of the "Trade Show" are most welcome to the newcomer

Thanks

Regan

At Prescott people fly into Phoenix and either rent a car or take a commuter bus to Prescott. I'm not sure about any puddle jumper flights to Prescott. I'm not sure about the bus schedule either, but I know several have done it. Once you get to the facility, it is handy. It is held at a casino/conference center/resort on the edge of town. A few dining options right there, trade show and classes in the same building. Being a casino, there are usually waiting cabs at night for a run downtown. Nightlife and restaurants in Prescott, or over the hill to the east Prescott Valley. 

Sheridan. Until we started exhibiting we always flew. Billings mainly and rent a car. One time I checked out other options and Rapid City was a fair bit cheaper to fly into. The cost difference for the two of us paid for the rental car. Longer drive to Sheridan but we made a week out of it, spent a few days in the Black Hills first and it was a good way to do it for us. 

Tips of the Tradeshows -

Sign up for classes you want early. The hot ones always fill. Don't sign up for classes the whole time and miss the trade show. Last year they started keeping the trade shows open an hour later on Friday, but that's only an hour. Between lunch and an hour at the end of one day, it can still be tight. 

Most everyone is very approachable. There are some top dogs teaching and some just showing up to hang out. They are regular folks. Gotta question, ask it. Just want to introduce yourself and meet and greet, that's cool too. There are a lot of people walking around just like you - they like to talk leatherwork and you can BS with a lot of neat people.  Prescott also has big comfy chairs in the hallway. Great place to meet new people. 

Trade show - you can learn a bunch there too. See a tool you don't know, ask about it. Don't see a tool you are looking for, somebody likely will know where to get it. Ask about different leathers, hardware, machines - it is all there. You will see stuff that you didn't know existed. You can pick up all kinds of info. on a side note - I know a guy who gives away rulers and stickers, and has a pretty well stocked candy dish too. 

I just asked my wife what her advice would be to someone going to their first show. She said "Tell them shows are a kick-ass good time and to bring money!" Yeah, that too. 

 

Share this post


Link to post
Share on other sites
18 hours ago, bruce johnson said:

At Prescott people fly into Phoenix and either rent a car or take a commuter bus to Prescott. I'm not sure about any puddle jumper flights to Prescott. I'm not sure about the bus schedule either, but I know several have done it. Once you get to the facility, it is handy. It is held at a casino/conference center/resort on the edge of town. A few dining options right there, trade show and classes in the same building. Being a casino, there are usually waiting cabs at night for a run downtown. Nightlife and restaurants in Prescott, or over the hill to the east Prescott Valley. 

Sheridan. Until we started exhibiting we always flew. Billings mainly and rent a car. One time I checked out other options and Rapid City was a fair bit cheaper to fly into. The cost difference for the two of us paid for the rental car. Longer drive to Sheridan but we made a week out of it, spent a few days in the Black Hills first and it was a good way to do it for us. 

Tips of the Tradeshows -

Sign up for classes you want early. The hot ones always fill. Don't sign up for classes the whole time and miss the trade show. Last year they started keeping the trade shows open an hour later on Friday, but that's only an hour. Between lunch and an hour at the end of one day, it can still be tight. 

Most everyone is very approachable. There are some top dogs teaching and some just showing up to hang out. They are regular folks. Gotta question, ask it. Just want to introduce yourself and meet and greet, that's cool too. There are a lot of people walking around just like you - they like to talk leatherwork and you can BS with a lot of neat people.  Prescott also has big comfy chairs in the hallway. Great place to meet new people. 

Trade show - you can learn a bunch there too. See a tool you don't know, ask about it. Don't see a tool you are looking for, somebody likely will know where to get it. Ask about different leathers, hardware, machines - it is all there. You will see stuff that you didn't know existed. You can pick up all kinds of info. on a side note - I know a guy who gives away rulers and stickers, and has a pretty well stocked candy dish too. 

I just asked my wife what her advice would be to someone going to their first show. She said "Tell them shows are a kick-ass good time and to bring money!" Yeah, that too. 

 

That is great information for a new comer ... Thanks so much Bruce I really appreciate it.

Still would be nice to connect with others that are going, and if anyone would like to split a room, I am thinking I will be there on Wed, Thurs, Fri. 

Let me know :)

Share this post


Link to post
Share on other sites

Well.... I just booked my Flight and Rental Car

Since I have not won the lottery ...yet.... Still hoping I might find a roommate to share the room cost.

I will be arriving in phoenix at about 6pm, renting a car and driving to Prescott on Feb 26th.

I am looking forward to the show and meeting many fellow Leather Workers :)

Regan

Share this post


Link to post
Share on other sites

I am excited to attend my first show too. I have friends in Tuscan but I dont know about the 4 hour drive from there after I have already driven 7hours from southern California. Since I have turned my living and dining rooms into a leather workshop complete with sewing station for my consew 206rb-5,  stamping/tooling station, cutting table, and I have 45 hides hanging from the ceiling I figured I had better go if it is this close. been working with leather for 8 months now. Picked it up and ran with it after my girlfriend of 11 years passed on and haven't looked back. love leather as a medium and it allows my creativity to flourish. hope to see you all there. I will be the 6'7" dude with the s%#t eating grin who is acting like a 1o year old at his first baseball game.

Edited by wydfuqnopn

Share this post


Link to post
Share on other sites

Yayyyy ... another wide eyed leather worker :yeah:

Looking forward to meeting you. 

6'7" .... hard to miss !

Regan :)

Share this post


Link to post
Share on other sites

Ok, look for the tall guy, Got it, 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...