Ken Nelson Report post Posted May 26, 2019 I have a Juki Pro 2000 Ferdco sewing machine I would like to put a lube box on. I got the box from Ferdco a number of years ago but the screw is not correct for this machine. Can anyone give me right screw size and pitch for this. I had it on a Cobra Class 4 for a while. Thanks Ken Quote Share this post Link to post Share on other sites
JJN Report post Posted May 26, 2019 I can measure mine on Tuesday if someone else doesn't provide it sooner. Quote Share this post Link to post Share on other sites
Ken Nelson Report post Posted May 26, 2019 thank you Quote Share this post Link to post Share on other sites
JJN Report post Posted May 26, 2019 (edited) I was by the shop after brunch with the family so I picked up the pot with the screw/bolt. It measures .232" in diameter and 10 threads measure .357" +/-. It is a 15/64" x 28tpi x 12mm machine screw. Don't ask me why sewing machine screws use inches for the diameter and pitch and millimeters for the length, but they do. You need to order it from a juki parts dealer. part no SS-7151210-SP I looked at the parts manual and it confirms my measurements. Edited May 26, 2019 by JJN added info Quote Share this post Link to post Share on other sites
Ken Nelson Report post Posted May 27, 2019 Thank you, Sir! Quote Share this post Link to post Share on other sites
