Removing leather from a clicker press die

[Lfrog]

I have had some dies made they cut fine, as  far as I am aware. I am finding it difficult to remove the leather from the dies. I am cutting russet veg tan approx 12 -16 oz.

 

Is there something I am missing to help me remove the leather more easily? Thanks in advance for your help.

[JerseyFirefighter]

I know since the dies are already made it might be difficult to incorporate, however Texas Custom Dies add a foam mold to the inside of most of a lot of their dies. The blade of the die cuts the leather, the foam compresses and then pushes the leather out do it does not get stuck in the die. 

[shoepatcher]

Yes   if you have any bring on the dies, ejector foam can be glues to the braces.  Done it many times to dies.