John at Byson Report post Posted January 6, 2020 For various complicated reasons we are ceasing to do boot work and so we will be selling our Singer 29K60 machine. This is a long arm treadle model with the "splittable" arm ( there are similar machine out there with a one-piece arm which are virtually impossible to service). It has been drilled to accept a motor at some stage but we have used it as a treadle machine for the last 12 years or so. We are open to reasonable offers or would swap for a Singer 46K49 / Allbrook & Hashfield / Techsew 402 or similar. Posting here before posting anywhere else. This is a very nice, working machine. The table hardware is included but will need a new top making as it is for a short arm machine. By all means contact us for further information. Share this post Link to post Share on other sites
robinsone Report post Posted January 7, 2020 Would it be possible for you to take detailed measurements of the table? It would be helpful for us trying to build a similar table like the one in the picture? Thanks in advance. Share this post Link to post Share on other sites
John at Byson Report post Posted January 22, 2020 (edited) I can certainly have a go. Which particular measurements do you need ? Do you have access to an (oldish) copy of Visio ? Edited January 22, 2020 by John at Byson Visio Share this post Link to post Share on other sites
John at Byson Report post Posted January 22, 2020 Here you go... Singer patcher table.vsd Brace.pdf Visio-Leg.pdf Share this post Link to post Share on other sites
tmoffitt Report post Posted April 26, 2020 I have a Singer 46KSV49 for sale if you're interested Share this post Link to post Share on other sites
