mariuspirvu Report post Posted January 29, 2020 Quick and dirt cheap stitching pony we made as a diversion from working with leather only. It's made of a plank of pine wood from the local hardware store, three screws with nuts and a couple of wood screws. Took about an hour to build but it does its job well. A video of making it here . Pattern available here Quote Share this post Link to post Share on other sites
chuck123wapati Report post Posted January 29, 2020 (edited) Great job! I built mine out of recycled pine from an old shipping container. two square shank machine screws, two wing nuts two washers and two wood screws and some leather of course. Edited January 29, 2020 by chuck123wapati Quote Share this post Link to post Share on other sites
mariuspirvu Report post Posted January 30, 2020 Looks great! I needed one that grips the table and pivots on two axis because I film what I make and a sit on pony wasn't helpful anymore. Quote Share this post Link to post Share on other sites
DJole Report post Posted January 30, 2020 Gotta love that dual pivot for best placement! Happy stitching! Quote Share this post Link to post Share on other sites
Ferryman Report post Posted February 11, 2020 Here is a stitching pony I made last weekend Quote Share this post Link to post Share on other sites
fredk Report post Posted February 11, 2020 nice suggestion: glue some magnets on the jaws, at the lower level of the outside leather. most useful for attaching a needle to whilst sewing. I have several magnets on mine Quote Share this post Link to post Share on other sites
Ferryman Report post Posted February 11, 2020 Thank you FredK It was a piece of oak I had. I will certainly inset some magnets in the sides. Quote Share this post Link to post Share on other sites
