Jump to content
courtney

Singer 45 k 25 roller guide

Recommended Posts

Does anyone have the complete back roller guide set up for a singer 45 k cylinder arm machine for sale?

Share this post


Link to post
Share on other sites
1 hour ago, courtney said:

back roller guide set up

I´m sot sure - do you mean a flip down roller guide mounted to the backside of the machine?

Share this post


Link to post
Share on other sites

Mmm...not the roller presser foot, but a guide to keep it straight. I’m not sure what the original configuration was, but I saw this that looks right?

BE3AFE00-1DD0-4F13-B939-2E7C66F97571.jpeg

Share this post


Link to post
Share on other sites

Hi Courtney, The one you have in the picture is by the looks of it ,made up, even the needle plate as the screws do not sit proud of the plate, they are level with the plate.The original setup for your machine would have been something like this:

20200217_114559.jpg.195cd2246a9f7ca19363fabd3e1b93c4.jpg

The other option was a rounded end but no roller:

20200217_114650.jpg.879012f05a56eb5cbda83c60ec833e41.jpg

There were also the combination guide which if your specialty is belts might come in handy for you if you can find one:

20200217_115236.jpg.d6072cfff8e12270636c28a4700c0bbd.jpg

There were an array of guides for many different functions but mostly for the 45K89 class machine, the following are for the flatbed 45k1 etc. the black ones are from a Adler 4 or 5 so they fit the Singers also but not their screws for fixing them to the plate, singers have a different thread.

20200217_114946.jpg.82fb02585430d58c76904113d4f06a95.jpg

There was also a swing guide that could fit on the 45k25 also. This one is user made  but if you find one be sure to get the screw that holds it on to the arm.

20200217_114139.jpg.d8ba400c66cb3c408cf53bf3786d7532.jpg20200217_114212.jpg.7198177ff796b239245bf1a6fb6a2cb1.jpg20200217_114257.jpg.26c57e9d171a1ef8e3cd55db93e0392a.jpg

They can be very hard to find so you might consider making one, you will need two needle plate screws for the fixed side plate type or one larger screw ( i think it has the same thread as the oil pot screw) for the swing type, and two thumbscrews for fixing the guide.Try Ebay now and again as they do pop up from time to time or member Constabulary here as he has things like this for sale now and again.

 

 

Edited by jimi

Share this post


Link to post
Share on other sites

That is good reference, thank you!

Share this post


Link to post
Share on other sites
On 2/16/2020 at 10:08 PM, Constabulary said:

I´m sot sure - do you mean a flip down roller guide mounted to the backside of the machine?

Do you happen to have something like this?

Share this post


Link to post
Share on other sites

Thanks again Jimi for the pics. Constabulary I sent you a couple messages that look to not have been read. Maybe this is in the wrong place? Anyone have these guides?

 

Share this post


Link to post
Share on other sites

I have not seen the double guide before, thanks, I can see a new project coming up.

Bert.

Share this post


Link to post
Share on other sites
15 hours ago, courtney said:

Thanks again Jimi for the pics. Constabulary I sent you a couple messages that look to not have been read. Maybe this is in the wrong place? Anyone have these guides?

Hi Courtny, I am not sure if there are swing down guides for the 45k machines, i have one on my Pfaff 335, but remember if you do find one to fit you have to drill and tap the holes in the back of the machine. There seems to me like a very limited amount of space at the back of the 45k head and that is probably why they do not have them.

Share this post


Link to post
Share on other sites
15 hours ago, Bert51 said:

I have not seen the double guide before, thanks, I can see a new project coming up.

Hi Bert, these guides are in almost all of the 45k parts manuals :thumbsup:

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×
×
  • Create New...