Jump to content
James Roberts

Wanted: Throat Plate for Singer 42-5 (part 8192)

Recommended Posts

Hello,

I am refurbishing a Singer model 42-5 Industrial machine and am missing the throat or needle plate, specifically part no 8192 (if you have a different throat plate I would need the appropriate feed dogs, presser feet as well).

Hopefully someone can help me.

The plate should be ~56mm wide, 86mm deep and a bit under 2mm thick, there should also be 60mm between the two screw holes.

Cheers, James (Australia)

Edit: Just realised this should probably be in the wanted forum, if so maybe a moderator could move it.

42-5ThroatPlate.jpg

Edited by James Roberts
Posted to wrong board?

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×
×
  • Create New...