Jump to content
pruettjr

Palmgren AP-10 press

Recommended Posts

This is my first post and hope I’m doing it right.  I removed the 2 teeth from the ram like a lot of YouTube videos suggest.  The issue I have is the  ram wobbles like crazy.  The ram action is not smooth at all.  Could removing the 2 teeth on this press be harmful?  If so where can I get a good replacement ram? Thanks for your help...Joe

 

Share this post


Link to post
Share on other sites

Show us some pictures of your press so we can see what you have and what you have done.

Tom

 

Share this post


Link to post
Share on other sites

Thanks for responding.  Haven’t really done anything special.  I added set screw to ram and filed off two teeth.  Removed wheel and added collar to left side press.  Added  longer handle.  Is there supposed to be a spring like plate behind the ram face plate. The manual doesn’t show one.  

  pic 1.jpeg

pic 2.jpeg

Thanks for your help...Joe

 

 

Edited by Northmount
Rotated Photos

Share this post


Link to post
Share on other sites
On 7/6/2020 at 5:26 AM, pruettjr said:

the  ram wobbles like crazy

The 2 bolts in the front cover are used to adjust the amount of slop forward and backward on the ram.  Need to tighten enough to remove the slop, but not so much to lock the ram making it difficult to move the ram.

Tom

Share this post


Link to post
Share on other sites

Thanks Tom...I can’t seem to find that sweet spot but will keep trying...joe

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...