grizzlysaddlery Report post Posted January 10, 2021 I've got a cowboy machine and need to know to know the length of the belt that goes to the head the belt on the machine has m57 on it i take it that it is 57 inches long. i bought the machine new. but none of the paper work gives any information on that. Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted January 10, 2021 Yes,M57 is a 57" belt. Quote Share this post Link to post Share on other sites
grizzlysaddlery Report post Posted January 10, 2021 do you carry a belt that size? Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted January 11, 2021 Yes we do but you can also get it @ TSC or Atwoods or even a auto parts store it needs to be 3/8" wide. Quote Share this post Link to post Share on other sites
grizzlysaddlery Report post Posted January 11, 2021 On 1/10/2021 at 1:12 PM, CowboyBob said: Yes,M57 is a 57" belt. i got one from orieiy's auto parts but it is serrated and slips unless i start it by hand ill check other places Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted January 11, 2021 Adjust it,the speed reducer has 2-bolts you can loosen & lower it down to tighten it. Quote Share this post Link to post Share on other sites
DrmCa Report post Posted January 12, 2021 When I replace accessory belts on my cars, I keep old ones and if they are about the right size, I cut them along the groves into 2-grove belts. They then work for another decade on my sewing machines. Quote Share this post Link to post Share on other sites
