Jump to content
chiefjason

Dan Wesson 715 6" barrel mold

Recommended Posts

OK, I found this mold a while back.  Put it up as a listing on my etsy page.  Just sold a holster for it.  Now I'm at a loss for where I found it.  So I'm coming here to see if anyone has seen one.  Called Boise Foundry and no luck.  And that's where I thought it was.  Checked Holstersmith and Bluegunstore.  No luck.  My email to Duncan's bounced back as undeliverable.  

Next option, seems this is close in size to a Colt Python.  Any experience with that?  It's not a tightly molded holster so close should work.  But it does have a security strap so it needs to be real close.  

Share this post


Link to post
Share on other sites

I've made a few for Dan Wesson, but I always need the gun.  The front cylinder release is unique.  If it's a loose design, the Python "Large Magnum" from Bunkhouse may work also, but I'd look up the cylinder diameter before you do.

Share this post


Link to post
Share on other sites
On 2/2/2021 at 8:45 PM, Brooks125 said:

I've made a few for Dan Wesson, but I always need the gun.  The front cylinder release is unique.  If it's a loose design, the Python "Large Magnum" from Bunkhouse may work also, but I'd look up the cylinder diameter before you do.

I'm going with the Colt Python.  Cylinder is just a hair wider than the 715.  I do no molding on the release side of the cylinder.  It's kind of a western style holster with a strap, so no real friction retention at play.  But I removed the listing until I can verify this works.  

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...