Frodo Report post Posted February 5, 2021 (edited) This how I cover a whip handle, You need, A a piece of 3/4'' pvc what ever length you need A 3/4pvc cap, for the other end, i use a 1'' coupling, a 3/4 coupling You will need 25 lengths of lace 6'' longer than the pipe 1 piece of lace that will spiral around the entire length of the pipe For the other end saw the 3/4 coupling in half. inside the 1'' coupling is a small pipe stop ridge, dermal that ridge gone the 3/4 coupling should slide into the 1'' coupling push it in half way glueed cover the 1'' coupling with a braid slide it onto the handle that you made, the coupling should over hang the pipe just enough to dress up the edge epoxy the whip into the 3/4 pipe Edited February 5, 2021 by Frodo Quote Share this post Link to post Share on other sites
mike02130 Report post Posted February 5, 2021 Fill it with lead and call it a sap. Quote Share this post Link to post Share on other sites
