Need a source for chicago studs

[MaxBlancke]

I guess they are called chicago studs. They are the one-piece, two-sided studs that used to be very common for adjustable straps. Chicago screws might work, but there are drawbacks. One side has a slot machined into it, which is ahistorical. Also, the come unscrewed when you don't expect them to. The one piece units are easy to remove for adjustment, but stay in place unless you deliberately move them.

Up to now, I have always had a good stash of old ones, taken off of old military leather gear. But I am making some new sword belts, and want to find a source for those things, and had a frustrating experience looking for them on the web. A few places sell them one or two at a time, very dearly, as a specialty item, but the regular supply houses don't seem to carry them.  It confuses me, because they are stronger, last longer,  and should be easier to manufacture than the threaded kind.

I would not be surprised if they go by another name, and I am just ignorant of it. I tried a great many names in my searches.

Thanks everyone for taking the time to read my rant. I joined here out of desperation to find these things.  Looking around the forums, I see people doing some very good work. I think I will like it here.

Max

[chrisash]

Are you thinking of Sam Brown studs like these

Identity Nickel Button Stud (Sam Browne) | Identity Leathercraft

[Chakotay]

they're all over e-bay. That's where I buy them in bulk. Here's just one listing:

https://www.ebay.com/itm/50pcs-Solid-Brass-Round-Head-Stud-Screwback-Leather-Bag-Chicago-Screw-Nail-Rivet/153353252327?hash=item23b490ede7:g:lREAAOSwlkpcTD2M

[fredk]

No chaps, those are not what he is looking for,

Imagine a Chicago Screw assembled, but in one piece. A flat head on each side. Some old fashioned military equipment used to attach to belts and straps using them

[MaxBlancke]

I am surprised that these are apparently no longer used, at least in this community. Between my Dad and I, we have 6 sets of binoculars, and every one of them has the straps held on this way.  They never come loose accidentally, and they make adjustment of the strap length easy, requiring no tools.

That is the big advantage. When I was a military cadet, the sword belts were held together with these, which made it trivial to take apart for cleaning and polishing.

I still think that they have to be readily available under some name that I don't know to search under.

[4squareleather]

https://www.chicagoscrews.com/

You can get them without a driver slot there.  also to keep the from backing out use loctite or similar thread locker.  they have make both removable and non removable.