Jump to content
Treesner

strap end cutter for press

Recommended Posts

do you know of any strap end cutters with a V or English point that has a handle that is 3/8" round. I'd like to mount it in my grommet press to cut straps quicker with a jig instead of hammering 

this looks like it could possibly be 3/8" waiting on seller to let me know https://www.ebay.com/itm/324754875911

also if you know of any kind of base type of thing that the has 3/8 shaft that I could use in the bottom part of the press like this https://www.weaverleathersupply.com/catalog/item-detail/65-6585/brass-anvil/pr_9197 let me know, I'll probably make something DIY though 

Edited by Treesner

Share this post


Link to post
Share on other sites

get with one of the die makers and see if they can make a strap end die with a 3/8" quick mount for the press. 

Share this post


Link to post
Share on other sites

I just remembered that I have these cutters. Belt tip shapes. There are ten, from about 15mm to 38mm. I've not used them but other cutters I have I use under the ram on my press

belt tip cutters, 01LWs.jpg

They cost about £10 a set, off ebay.

PS, I didn't buy these, they were sent to me in error instead of what I wanted

Share this post


Link to post
Share on other sites

Yep, could work as the design looks rigid so should concentrate the downward force. Pretty expensive, though.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...