Members bellabychasity Posted January 21, 2022 Members Report Posted January 21, 2022 Need to find a replacement belt! my servo motor is what came with my machine (YEARS AGO) FAMILY ELECTRONIC SERVD (yes D) MOTOR Model FESM 550-C THE BELT I HAVE IS : 56Feitsew-40 Quote
Members Sonydaze Posted January 21, 2022 Members Report Posted January 21, 2022 If you don't have a sewing machine dealer near you, most auto parts stores should be able to match a belt up. Bring your old belt with you. Quote
Members bellabychasity Posted January 21, 2022 Author Members Report Posted January 21, 2022 !!! I’m trying to get back into my creative groove as a belt is going to definitely move things along! So Thaaaaaaaaanks! I hope something magical happens to you today!!! Quote
kgg Posted January 21, 2022 Report Posted January 21, 2022 3 hours ago, bellabychasity said: Need to find a replacement belt! Option suggestions: 1. Why not make your own belt. I just purchased some 10 meters (32.8 ft) of 6mm diameter Rough Surface Green Polyurethane off Amazon.ca for $28.79 CA ( https://www.amazon.ca/gp/product/B07W5L7NPV/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&th=1 ) plus tax to make a new drive belt. This will be the main drive belt from a repurposed sewing machine motor a Rex 550 watt servo motor for my new to me Atlas lathe. 2. Buy couple off Amazon they are cheap, two for $14.99 CA ( https://www.amazon.ca/CKPSMS-White-Industrial-Sewing-Machine/dp/B08CXZBCXZ/ref=sr_1_2_sspa?crid=3NE9LYGBI4UIM&keywords=56%2Binch%2Bsewing%2Bmachine%2Bdrive%2Bbelt&qid=1642740205&sprefix=56%2Binch%2Bsewing%2Bmachine%2Bdrive%2Bbelt%2Caps%2C115&sr=8-2-spons&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFTSjEzOTRBRFBOMUomZW5jcnlwdGVkSWQ9QTA5MDI5NjkzSFBFUElNN1lYNTdNJmVuY3J5cHRlZEFkSWQ9QTA2NDE5ODgzNkpLQTJETjVNS0hYJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ&th=1 ) kgg Quote
Members trash treasure Posted January 21, 2022 Members Report Posted January 21, 2022 Auto parts stores might not have a belt of that small a cross section, but any industrial supplier will have one - I use McMaster Carr. The belt size you need is called a "3L" - Just measure the length of the old one, or around the outside of the pulleys. Quote
Members DrmCa Posted January 21, 2022 Members Report Posted January 21, 2022 When I was in a pinch for a belt, I used an accessory belt from my car, sliced in 2 halves, so from 4x Vs it leaves 2 pieces with 2x Vs on each. Even if slightly cracked after being on the car engine for a few years, they still work fine for sewing machines. A V belt does not need to be a perfect fit or only 1 specific size. There is quite a bit of adjustment on the servo motor, so a slightly longer or shorter belt will work. You are looking for a 3/8 belt. Hardware stores normally have 1/2 belts that are too large and stiff. But industrial supply stores have both types. Quote
CFM Frodo Posted January 21, 2022 CFM Report Posted January 21, 2022 https://whiteheadindustrial.com/v-belt-3-8-top-width-multiple-sizes/?gclid=CjwKCAiA0KmPBhBqEiwAJqKK45fpTSecd_yI3KKzaw9-mZN-Mw3mauqi77VKbFD8PCY5HCTp2-lc_hoC-yIQAvD_BwE Quote
Members arjon Posted January 22, 2022 Members Report Posted January 22, 2022 I get mine at the Stihl dealer down the street from me. They sell chainsaws (obviously), lawnmowers, generators, tools and farm equipment and they stock 3L belts. They always have what I'm looking for Quote
Members bellabychasity Posted January 23, 2022 Author Members Report Posted January 23, 2022 Many thanks for all of your replies! I plan on trying each and every one of them! I LOVE the idea of making my own!!! However, that’s going to be the Grand Finale of my tries! I may need some wine and patience for that!!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.