Lobo Report post Posted May 19, 2012 Used Tippmann Boss stitcher. Purchased new from Tippmann in November, 2008. Used until August, 2010 for general production work of holsters, belts, and accessories. Machine has been sitting idle since that time. Condition is considered to be good and serviceable, but definitely used and offered with no warranty, express or implied. Will ship in original factory carton with standard accessory items including bobbins, bobbin winder, some needles, manual, and a few spare parts on hand (rack parts, helical drive gears, screws). Price from Tippmann is $1495.00 new, and they regularly have a year-end sale at around $1195.00. Will sell this one for $800.00 picked up in Pueblo, Colorado, or will ship to the lower 48 states for $30.00. Contact by e-mail only, click on my website link and use the contact page. NOTES: 1. The Tippmann Boss is a manually-operated stitching machine that is capable of stitching up to 3/4" thickness in leather. 2. General limitations include a throat depth of around 9" or so, and well known requirements for frequent adjustments of thread tensioning and timing. 3. There is a definite learning curve involved in owning, operating, and maintaining the Tippmann Boss machine, and this model can be very frustrating for those having little or no experience with stitchers in general. 4. I am selling this machine to recoup part of my initial investment, after stepping up to a far more capable piece of equipment. I do not have the time or inclination to provide instruction or tutoring in operation, adjustment, or maintenance so the purchaser should be prepared to go through the learning process without assistance from me. 5. Packaging in the original factory carton involves partial disassembly of the machine. Reassembly and adjustment for the intended uses will be necessary before using the machine. The factory manual provides basic instruction, and Tippmann Industrial Products' website contains a video instructional and troubleshooting guide. 6. This machine is the current production model with aluminum housing, not the earlier cast iron version. 7. Please do not bother haggling over price or terms. It will be $800.00 in cash or certified funds, plus $30.00 ground shipping to a US address, otherwise the machine can remain bolted to the work table in my shop. Share this post Link to post Share on other sites
Lobo Report post Posted May 25, 2012 05/25/12 SOLD, PENDING FUNDS. Share this post Link to post Share on other sites
Lobo Report post Posted June 11, 2012 Sold and delivered. Share this post Link to post Share on other sites
