paydenewkirk Report post Posted April 9, 2013 My old Adler 105-64 finally wore out its shuttle. Which one do I need to orded? The part number on the old one is 005002924, but I can't seem to find a matching one. Where is the best place to order one? Any and all help is appreciated cause I'm shut down in the leather department until I figure this out. Quote Share this post Link to post Share on other sites
paydenewkirk Report post Posted April 9, 2013 Well I think I got it figured out. The folks at Campbell-Randall helped sort it out. Very nice people. I'll be using them again. http://www.campbell-randall.com/ Quote Share this post Link to post Share on other sites
Trox Report post Posted April 9, 2013 My old Adler 105-64 finally wore out its shuttle. Which one do I need to orded? The part number on the old one is 005002924, but I can't seem to find a matching one. Where is the best place to order one? Any and all help is appreciated cause I'm shut down in the leather department until I figure this out. Hi, it can be a hustle to find the right one for your machine because Adler changed the shuttle on most of their 105 machines for a bigger open type (# 065 00 185 4). Then they changed it again for the big new shuttle thats fit the 205 and 204 machines (# 204 15 010 4). The closed big type that is the industial standard today in both Juki 441 and DA 205-370. If you are sure about the part number on your 105-64, then it`s from before 1972 and has the first small shuttle (# 005 00 290 4). (# 005 00 292 4) is only the bobbin house, the complete shuttle is # 005 00 290 4. (The small one is the same size as Singer 45K use and the big one is the same size as the 441) Thats the same shuttle who was in the forerunner class 5, you can see that the part number starts with a 005. I bought this shuttle for my 105 from Dürkopp Adler, but the part was not genuine and had a lower price. You can also buy it from a dealer that sells Japanese Hirose or the Italian Ceralini. These companies still make them (thats probably where D. Adler buys it from anyway). It also possible to get them from China. However, you better choose the Japanese or Italian ones. Dan Naegle at Campbell Randall has it too. Good luck Tor Quote Share this post Link to post Share on other sites
Anne Bonnys Locker Report post Posted April 13, 2013 Italian shuttles are ok but the Japanese ones are the best in the world. Some Chinese shuttles are very good but unless you know the factory it is impossible to tell so stick to Japanese. Quote Share this post Link to post Share on other sites
Trox Report post Posted April 14, 2013 My Chinese 441 came with a Japanese shuttle, so I guess the Chinese agree with you too. LOL Quote Share this post Link to post Share on other sites
