Finished work table, mounted ready to sew

I did end up doing a fair amount of work to get this "salvage" table into shape, the plans I was able to acquire from various helpful Patcher owners over the past year did get me heading down the right road; but in the end the layouts were not correct for the 29-4 and I needed to make my own pattern for the cut out. I have to say though in the end my final idea came out better than I could have hoped, I don't know that anyone has come up with a similar approach with the sewing machine drawer & top combo but maybe some out there have... Aside from the 2 carriage bolts & J hardware to mount the table "everything" else I used was salvaged from the original sewing table, even the wood screws and trim pieces I used to make the supports. The entire project cost me less than $5... the original table was a rescue, so in the end it really met my needs in spades. If anyone would like the balance of production information or pointers I'd be happy to help out. Obviously though you have to have the wood working tools & the time... both are invaluable to making a project like this.