Romana
-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Gallery
Everything posted by Romana
-
I tried three different spool cases and it's still the same, but I'll try turning it again. ☺️❤️
-
sometimes it jumps back, but mostly it stays in the middle. The twitches are only when the thread is in the middle
-
Here the lower thread goes correctly, but after a while it jumps to the middle
-
I can't even record a video to make it look good. What I mean is that the machine sews well for a while and then seems to jerk in places. I attributed it to the lower bobbin thread coming out in the middle.
-
Hello. Could someone please help me with some advice on why the lower thread goes up in the middle (red) and not on the left (blue) on my Pfaff 335? The photo of the hook is from the internet, I just needed to read the points.
-
Friq I have already put the back of the machine back together, but after dropping the presser foot, the outer presser foot won't let go and stays hanging. I also discovered that there is a spring left in it and I don't know where it belongs.
-
Thank you, I'm currently taking the whole machine apart, cleaning it and putting it back together 😂
-
Hello, does anyone have instructions on how to adjust the back of the machine? It's a Pfaff 335 clone. It's hard to lift the presser foot.
-
Uwe, thank you thank you thank you!!! I have a Dison 335 A, a clone of the Pfaff 335 and I have been searching the internet for about a week now how to set the walking foot correctly. I finally understood it from your video and the setting is done! Thank you again and greetings from the Czech Republic ❤️