Ghoust6

Problem solved friquant is right. Thank you all!!

Constabulary the screw you are pointing is 375 i think and its locked by 1518 nut so Im unable to unscrew it. First I would have to unscre the nut but there is no way i can reach it. I think that lowering the fork or position it in a place so i can unscrew 58 screw will do the trick. Bonus for everyone mix of strong alcohol 45% + naphtha 45% + sewing oil 10% will do magic with old rusty screws. I think the only stronger thing than that is hot naphtha. Also that mixture won't destroy shelac or paint. Ofcourse it's just for losen everything and after that you must use sewing oil only. Friquant thank you so much I think you might just solve the problem but when I try I will say.

I appreciate any help and yes I was trying to push fork towards the camera and I think i did about 1-2mm and the whole mechanism start to work almost good, but almost it's not perfect. If the fork have thread then the screw should have at least cut so i can unscrew. Everything in this machine should be easy to unmounted. I can take off that fork, i was using a lot of force and even cooling it. I was looking for a hidden super small bolt in the fork holding it so tightly. As I said I was trying everything and no luck. If someone ever unmounted that fork please help. I was trying to unmounted the mechanism behind the fork and still no luck. I can/t reach bolts or they are holded by nut behind the mechanism so still no luck.

Hey, am i going to get any help ?

Thank you constabular. That much i know but when i unscrew the nut the one centered right under the fork end and the lower one there is no way i can move the fork. Pictures shows clearly that everything is unscrewd and fork don't care.

I will add pictures today. I want to remove the lower fork connection (part no. 3037) from my Singer 18-2. It’s the fork attached to the lower connection rod that transfers rotation from the main shaft to the hook shaft. I need to detach it from the connecting stud without damaging anything.

Hello, I have a problem with my singer 18-2. I have no idea how to disasemble part number 3037. I did unscrew it but it still hold like hell to the parts that regulate the stich lenght. I wiuld be thankfull for any clues and pictures/videos. Thanks to all of you !!