Newman

Thanks for the input. I found a 31-15 for around $250 no motor no stand. I figure that a servo motor and pulley will set me back another $200+ and maybe $150+ for a stand? That is too close to a used Boss or something else that WILL stitch thicker leather and be controllable. More to think about... What would some one with more experience suggest? Also what is the capacity (thickness) a 31-15 will sew?

A roller or Teflon foot would hold the thicker material down tight and still allow the material to feed through the machine?

Thanks for the info. Yeah, I'm fully aware that a 31-15 "might" not be up for the task of thick leather. I have other projects in mind that will use thinner leather and I have read all over the internet that a 31-15 could be a good place to start, will handle more than expected and add something like a harness machine later. This wouldn't be ideal but I don't live in that world so I'm just looking for a good place to start. I do appreciate the advice and any advice there will be in the future. That is exactly why I'm here. The knowledge base here is much greater than my own but you can bet i I ask a question its because I have read a lot and still don't know. Q: Are these 31-15 machines spring foot machines, or walking foot machines? I haven't seen the machines yet but I believe they are walking foot. Thanks!

Hi all! I've search and really didn't come up with a good answer. I found a couple of 31-15's and thinking about picking one up. The problem is there isn't a motor for either and I'm not sure what is the best or will work and what would be a good set up. I'm gong to use it for holsters, belts, hand bags, etc. Some lighter leather and liner material and for holsters. I've read a bout servos not sure if that is what I want. Really I just need to know what motor and where do I find one. Thanks,