-
Content Count
38 -
Joined
-
Last visited
Posts posted by uscglechief
-
-
On 9/10/2014 at 12:43 PM, Bob Blea said:Hello Leila,
I've been playing around with some finishes for the flesh side of leather. I've made a key fob that I tried sealing with three different types of sealant to see how they wear. It has Wyosheen, Tan Kote and Resolene in three different test swatches on the back. So far it seems like the Tan Kote is holding up the best, and probably the one I like least is the Wyosheen. It and the Resolene may have needed thicker coats to do well, but rubbing in the Tan Kote seemed to smooth down the fibers and leave a finish that is holding up in my pocket.
Bob
Bob
do you think the Tan Kote would be a good option for the flesh side of a rifle sling? I dipped 2 slings and then thought that I just messed up given the flesh side may bleed.
Jess
-
Hello
i usually use the same size chisel as my lace, 1/8” chisel for 1/8” lace. That said I like using the smallest hole/slit I can for my lace work.
I bevel both sides on the flesh side of the lace and saddle soap the lace well before I start lacing.
Hipe this helps.
jess
-
do you still have a copy? js553920@gmail.com
-
its a stretch but do you still have the book?
Jess
-
Is the press still available??
Jess
-
I have made several sheaths and holsters out of my vingaroon, but am always left with a VERY strong smell afterwards. I have tried the baking soda baths but they don't really seem to help about the only thing that does help seems to be time, oil and top coats.
Question: do most on here paint or otherwise apply the vingagroon to their project? I have been submerging the project and allowing it to soak, which maybe part or all of my problem.
As always feedback/advice is appreciated.
Jesse
-
dang need to order, well i guess mahogany and red so i have both. Many thanks, i checked out your site...nice work!
-
A co-worker of mine asked if I could repair his leather bag, I agreed but cautioned him that the color of my repair would most likely not match. He is okay with, what I'm sure will be a mis-match.
I am looking for some help in determining the color and best way to apply...tan's seem to give me trouble and was thinking of spraying verse sponge or shearling.
I've attached a photo of the bag below. Any advice/help is always appreciated!
Jesse
Sorry for second post, I was thinking British Tan but not so sure now.
Jess
-
Thank you both!! That is exactly what I was looking for, guess i shoud have searched sudsy or everclear
It's not a deglazer... it's a facsimile of Fiebings "Dye Prep" it is supposed to clean and prepare the leather for dying.
90 parts water
5 parts alcohol (ever clear booze... the highest proof you can get)
5 parts sudsy ammonia.
-
When using my boss the thread seems to from time to time, twist. The twist itself will run up along the machine, while it doesn't appear to affect the product it does bother me as I'm not sure what I'm doing wrong. Has/does this happen to others? and if so how did you correct it? I've also had troubles with needle or thread skip, not sure of the proper term, was happening about every other stitch so I adjusted the needle scarf and that helped. My biggest issue now is making sure the stitch depth is set accurately turning that knob just doesn't seem to do anything.
Sorry this post is part question and part rant, guess its that love hate relationship with the Boss. I will admit I wasn't hand sewing long before I bought this machine second hand from a guy in Oregon, I followed the instructions, best I could anyway during the set and like others here find myself adjusting and fine tuning each time I use it....guess thats actually a good thing.
Any tips or advice would be appreciated.
-
Hello,
I originally posted this to "how do I do that?" and thinking this maybe a better forum.
Greetings everyone,
I know I've seen this before but can't seem to find the string, please forgive for starting it again. But I've been told you can make your own deglazer by mixing ammonia, alcohol and water. Does this work well to remove glue and dirt act? and are the parts equal?
One additional question, I am making a attaché or I guess a better description would be a large shoulder bag with brass D-rings and buckles and I have used large copper rivets for reinforcement where the shoulder strap will attach. My question is if I decide to go with a natural color, what if anything can I use to give it that "older than it is look?" Hi-liter? Have been bouncing back and forth between the natural look and several coats of Fiebings Chocolate dye.
As always any advice is greatly appreciated.
Jesse
-
Yeah I feel your pain, in Maryland and Pennsylvania here, kinda hard to find someone local.
Jess
Delaware
-
Greetings everyone,
I know I've seen this before but can't seem to find the string, please forgive for starting it again. But I've been told you can make your own deglazer by mixing ammonia, alcohol and water. Does this work well to remove glue and dirt act? and are the parts equal?
One additional question, I am making a attaché or I guess a better description would be a large shoulder bag with brass D-rings and buckles and I have used large copper rivets for reinforcement where the shoulder strap will attach. My question is if I decide to go with a natural color, what if anything can I use to give it that "older than it is look?" Hi-liter? Have been bouncing back and forth between the natural look and several coats of Fiebings Chocolate dye.
As always any advice is greatly appreciated.
Jesse
-
Hey Thanks to all, and sorry for posting a question already answered, King you were correct found some useful info on the search.
Jess
-
I'm sorry yeah a makers stamp.
What kind of stamp ? A makers stamp or a design stamp.
Thanks I'll check them out.
Order mine from tuffcase.com
They produce both maker and custom designed by you stamps.
My makers design is the photo on my profile.
-
Greetings,
I'm looking for a place that can make me a custom stamp for me. Any suggestions would be greatly appreciated.
Jess
-
I was afraid of that...thanks
jess
SOLD.....they go pretty quick. Sorry
-
Do you have a tippmann for sale?
Jess
Give me a call and we'll discuss. Thanks Double E! 864-862-5257
-
-
Very nice...looking forward to making my own. How do you like the boss? Have been toying with the idea of buying one.
Jess
-
-
Greetings
I'm new to the leather crafting world and love it so far, I'm probably jumping the gun but would like some advice on a sewing machine. I read Wiz's extremely informative postings and do believe walking feet are what I need, mostly belts, holsters, knife sheaths etc. My question is where is a good place to look for a used sewing machine???
Thanks
Jess
-
Yeah it didn't work for me either.
I did try just that myself, to no effect at all. Actually, I think it may be a problem of too little dye. Thinner pieces of leather came out brown, while thicker ones turned green. To me, it feels like some of the redder pigments were "sucked" away from the surface, leaving green pigment behind. Unfortunately, adding more dye did not yield any positive effects either. I have since switched to Fiebings, and am having no issues whatsoever.
-
Greetings All,
I'm new at the leather craft and coming into this string late...but had the same exact issue as the original post....I used ECO FLO brown dye and got a very green tint. SLC told me basically that was common below is there response.
I have since moved away from ECO FLO products.
Jess
Hi Jesse,
As hard as this is to believe, there’s too much dye pigment on the leather. You should be able to take a cloth and some rubbing alcohol and wipe off the excess. Now with that being said……………….all things should be tested………………..so, if you have a piece of the same leather dye a sample when it goes “green” try the alcohol. But that should take care of you. A lot of times Royal Blue, Oxblood and a few other heavy pigmented dyes will do tha
I am having the same issue with Eco Flo Java Brown. Oddly enough, it only happens on certain pieces of leather. One shoulder was perfectly fine while leather from another source turned an ugly shade of green. I just talked to the people at my local Tandy store, and they said they had a lot of issues with brown Eco Flo dyes and had pulled most of them off the shelf. I am going to switch to Fiebings Pro Oil, as I am hearing a lot of good things.
Cutting back the range
in Gun Holsters, Rifle Slings and Knife Sheathes
Posted · Report reply
Sorry to read this, I’ve always enjoyed your work/advice
jess