Retired LE

Ok thanks Dwight. My apologies to the OP (original poster) for hijacking this thread....

How did you attach the vacuum hose to the finished bag? Did you make your own fitting or use an existing item?

Ok thanks. I will check out the site. Mike

Thanks for taking the time to post a detailed reply. Your comment about a vaccum reserve brings up another question. I assume the reserve acts as sort of a reverse accumulator which are common in pressurized systems. I did a search on homemade vacuum systems and most of them had some sort of canister made out of pvc pipe, old air tanks and even some used fire extinguisher tanks. You mentioned that it helps in the event of a leak. Doesn't it also significantly extend the time for a full vacuum to be reached?

Ok thanks. I didn't realize there might be a break in period for this pump. The instructions were rather sketchy. I lieu of a vinyl or poly bag, I am going to experiment with a used inner tube that I picked up for free from the local tire store. I am working on an idea using pvc tubing to use as clamps/sealers on the cut ends. I also made up a vacuum hose using quick disconnect air fittings and a schrader valve fitting. Only problem I can see initially is that I won't be able to see through my homemade bag to see what needs to be molded - but I think the outline should be distinct enough. Will see how that works out. PS: Where did you get your bag and how much was it?

I read your post and noticed your reference to the vacuum bag. I am in the process of trying to put together my own vacuum forming system (without spending the big bucks if possible). I have a pretty good idea how the system works and the components needed - but I am running into problems with selecting a vacuum pump. From what I have read, the hand held vacuum pumps take forever to reach a level of vacuum that will mold leather, and the wood veneer units are prohibitively expensive. In the middle of the price range are the electric vacuum pumps available from Harbor Freight. I purchased one of those yesterday (see attached pic) and after setting it up, I noticed it emits an oil mist out the exhaust while running. That might be ok for a mechanic working on AC system in a garage - but it's unacceptable for in home leatherworking - not to mention potential health issues. So anyway, to avoid becoming long winded here.... I was wondering what system you are using. Thanks for reading, Mike Edit: After posting this I realized i probably just hijacked this thread and should have started a new thread? Perhaps the moderators will step in and adjust accordingly?

Well that would make sense since she purchased most of the stuff she had during the eighties. Thanks for the reply. Mike

Any update to this thread? This inquiring mind wants to know. Mike

That's what I initially thought. But I don't think it's strong enough for that function. I did try to punch a couple of holes in a piece of leather with it and this is what I got.

Here is a closeup of the threaded L-shaped handle.

Thank you! Makes sense now. I did get the swivel knife as well.

I recently purchased some used leather working items from a friend who is no longer actively involved in the craft. Among the items I received were two small tools - the purpose of which I have yet to figure out. The first item consists of three separate components that were stored in a Tandy zip lock bag with the number '8344' in black magic marker written on the outside. The second item was loose in the tool box and looks to be some kind of press. Anyone care to take a shot? Pics attached. Thanks for looking, Mike

Its for right hand wear with the gun canted forward. I may trim a bit more leather off of the front part of the thumb strap though to avoid that flap holster look.....

If no molds are available, it sounds like a good excuse to buy a real one for your collection?

Update: Just got back from a trip so haven't had time to post an update. Anyway, I received the machine as promised and it didn't take much to get it into operating condition; just a bit of grease on the working parts, some fine tuning on the thread tension, and a longer bolt to attach the stitching handle to the gear shaft. I attached it to my work bench with a couple of clamps and off I went. Included is my first holster – made for my AMT 45 Backup. Its not fancy, but it serves the purpose much better than the cloth inside-the-pant holster that I had. Thanks again to all for taking the time to read and respond. Happy leathering. (probly not a word but what the heck) Mike