Newbie Stumble

[Newbie Stumble]

Cut the filler and added extra filler to top and bottom, skiving to blend in.

Stitched it all together, and took a walk in the desert. Performed as I had hoped. Now I need to finish it. After touching up the profile and burnishing, do I rub in oil then apply Mike's "Mop N Glo"? Do I "Mop N Glo" first and then oil? Do I just "Mop N Glo" but not oil? Thanks!

[Newbie Stumble]

Thanks, immiketoo. If I know myself, there will be a pretty significant learning curve with tanning. But we'll see.

Made a little more progress on the holster tonight. After throwing around a bunch of ideas, I just decided to stay simple. I stitched on a dark decorative band. Then a hammer spur strap, and finally the belt loop. Next I'll cut the edge filler and stitch her together.

[Newbie Stumble]

Thanks! I'm all over these "guerilla" types of solutions. I also fool around with blacksmithing, and love scavenging and coming up with improvised tools and implements. I make all of my knives and tools with scrap. Don't ask what my yard looks like, or what my wife things about it....

We also raise goats (we get all of our milk for a bunch of children from two goats, with extra for kefir, yogurt, and the chickens!). I have at least one nice skin in the freezer. We also have four goats that have been needing butchering for way too long. (We need the meat and can't afford the feed.) I'm going to give processing skins my best shot. Finding time is the hardest part.

[Newbie Stumble]

Thanks, CountryTrash. The pic link was helpful. Renegade, enjoyed looking at your site. Nice work. Katsass, yes I'm using the Stohlman book. Tight budget is definitely my situation, so I like the coffee dye suggestion. At the end of your post you said to "apply the finish." What do you suggest. I've never finished any leather.....This is not only my first holster, it's my first attempt at anything with leather.

[My First Sloan/keith Style Holster]

Amazing work! I'd love to see the revolver resting in it...

[Newbie Stumble]

Well, I dug around and found some dark leather I had stashed away. It's thinner than the holster leather and will provide a wonderful contrast. I'm not sure exactly what to do as far as design is concerned, but I'd like to have the light and dark playing off each other. I was wondering if dark leather can take tooling/art work. It doesn't seem to me like it would show up very well. Thanks for any suggestions.

[Newbie Stumble]

Here are a few shots of what I've done so far....

[Newbie Stumble]

I appreciate the additional thoughts. I'm going to take some sandpaper to it and see what happens. I kind of like your idea too, Shooter McGavin.

Will get some pics posted.

[Newbie Stumble]

Thanks for the feedback. It's Tandy and it's quite thick. I could thin it for glueing another piece. I'm operating on a real low budget, and only have a few pieces of leather, so I might try other options. I'll search "slicking the flesh side." Yes, I doubt I'll make this mistake again. Hopefully it will turn into a happy mishap.

[Newbie Stumble]

Hello!

I'm just getting started with some leatherwork. I'm making a holster for my first project. As is usually the case when I'm learning something new, I make every mistake possible.

So, I made the holster pattern, traced it on the leather, then cut out the leather. Unfortunately I did things backwards, so now I have a left-handed holster. I can make it so the flesh (unfinished) side is out, but obviously that isn't ideal.

I was wondering if you all could suggest some solutions. Is there a way to finish the flesh side to make it smooth? What should I do?

I intended to try some decorative carving/stamping, but that may be out of the question now.

Thanks for any tips and suggestions.

Todd