mloser

Thank you!

I attached a picture. thanks.

I attached a picture of where the oil tubes are. Does it look right? Thanks, Mike

Here is a picture of the tubes under the side cover where the thread take-up lever sticks out. I tied/routed the oil tubes in their current position. When I took the cover off both tubes were just hanging there. Thanks, Mike

I bought a used Durkopp Adler 205-370 sewing machine which works great. I wanted to make sure I understand the lubrication system, so after taking off the end cover (cover with the secondary tensioner on it), I noticed 2 oil tubes that just hang down and drip on the frame of the machine. Can anyone tell me how these should be routed? I printed off the manuals but don't see a diagram or description of the oil tube routing.