Okay, I got in touch with Al Bane through the Class 4 group on Facebook. After talking through the alignment for the shuttle hook timing, we determined that the hex bolt facing down and slightly back when the needle was in position was not right. I ended up loosening the very first cam to the far left on the back and tapping it down and around until my hex bolt was facing me directly when the needle was in position to time the shuttle. Then I went back through the other two cams and timed them, then timed the shuttle hook. Tested it and everything worked beautifully. Now if I hadn't stabbed through my thumb nail and partway through my thumb, I would be a very happy camper. Thank you everyone for the help. I learned alot about the anatomy of my machine.