45k21 needle bar

[45k21 needle bar]

So Seiko makes a machine model SK or CK series that looks to be a 45k clones or 133k clones, but not 100% sure. It would seem that the 45k and 133k needle bars would be the same. I have a 133k18 if you can measure the needle bar diameter with a pair of calipers I can see what the 133k18 is. I imagine there is a clone somewhere that would work. 

[97x4 needles]

I sent you a private message, let me know I'm interested

[limited space - has anyone built a table with servo motor where you can change out device]

Put them on smaller tables or cut the tables. It's not hard to do and with most K-legs you can get a hold of shorter rear brackets and treadle braces. Also you can put casters on them too, so you can move them around etc. That's what I was able to do. 

 

[Weaver Leather Juki 441 Clone, Master Lockstitch heavy duty industrial commercial sewing machine]

SOLD

[Weaver Leather Juki 441 Clone, Master Lockstitch heavy duty industrial commercial sewing machine]

Bump, reduced to $2300

[Looking for shoe patcher (not Chinese)]

I have an Adler 30-10 I could sell you if you are interested. I'm located in Bloomington, Indiana.

[Weaver Leather Juki 441 Clone, Master Lockstitch heavy duty industrial commercial sewing machine]

Great condition Weaver Leather Master Lockstitch - Juki 441 Clone, on a weaver adjustable height stand, servo motor ready to go. Pick up preferred, $100 discount to pick up at current location. Don't really want to ship but can. Serious inquiries will need deposit to move forward.

Price: $2,495

Location: Bloomington, Indiana

email: robinson.erik@gmail.com

cell: 312-493-3140

[Beautifully restored Singer 45k25]

Sold

[Rare Singer 45k53 in Immaculate Condition]

Sold

[Amazing Singer45k69 on Completely Restored Table]

Never again will you find a Singer 45k69 on an originally restored treadle table such as this. Truthfully belongs in a museum. You will not find a Singer 45k69 like this ever again. Treadle table with integrated knee lift, bobbin winder attached to head and thread stand.

Asking price is $1495

Located in Bloomington, Indiana

Prefer not to ship to assure the security and safety of this restoration. Serious inquiries can text me 312-493-3140

[Rare Singer 45k53 in Immaculate Condition]

Rare Singer 45k53 in immaculate condition kept and maintained by Evo160k here on leatherworker. You will not find a Singer 45k53 in this condition ever again. On a custom wood space saving table on caters with servo motor and reducer pulley. Bobbin winder attached to the head with thread stand.

Asking price is $1495

Located in Bloomington, Indiana

Prefer not to ship to assure the security and safety of this restoration. Serious inquiries can text me 312-493-3140

[Beautifully restored Singer 45k25]

Singer 45k25 restored by user Evo160k in a painstaking japanning process (this work was recorded on this site). You will not find a Singer 45k25 in this condition ever again. Incredible restoration, really belongs in a museum. On a custom metal space saving table with powerful electric motor and reducer pulley. Including bobbin winder and thread stand.

Asking price is $1295

Located in Bloomington, Indiana

Prefer not to ship to assure the security and safety of this restoration. Serious inquiries can text me 312-493-3140

[Singer leatherwork sewing machine No. 51W54.]

This is a very small post bed. I have a 51w55 and its not really built for thick materials. Post bed wise look for a Singer 136w or the 167w as that's the walking foot.

[Cow Boy CB 335]

price?

 

[Singer 153w103 Pulley Removal]

Singer 153w103, can anyone help me with removing the stitch length dial or knob here. I can't seem to get it out no matter what I do and I'm concerned about damaging it. I've removed all the screws from the access plate adjacent to it.

Thanks in advance!

[Junker & Ruh needles]

7 hours ago, jimi said:

HI Brian, Sorry no, i never asked as i did not need one but you could ask here if they sell them? https://www.power-shoe.com/en

 It looks like they still make that model so i imagine they must have parts for them. it is the model AFL 85 on their web page and you can also download a manual for it. Good luck, Jimi.

@Jimi, can you message me or email me? robinson.erik@gmail.com, I'd appreciate it, thanks!

[Singer 29K60 in UK]

Would it be possible for you to take detailed measurements of the table? It would be helpful for us trying to build a similar table like the one in the picture? Thanks in advance.

[Mercury M-120-1 Industrial Sewing Leather Machine, SC-5-1, GA-5 Clone]

Price Reduced. Willing to take $400 for the machine. 

[Mercury M-120-1 Industrial Sewing Leather Machine, SC-5-1, GA-5 Clone]

Mercury M-120-1 machine (head only) for sale. No reverse but it does have a plate which can be inserted over the cylinder arm. Comes with 4 bobbins and original manual.

Looking for $600 plus shipping, OBO. Feel free to ask any questions.

Selling for no negative reason, just need a walking foot for my application which is hockey equipment repair and I do not need this anymore. 

[Needle System Confusion]

That's very helpful. Is there a good resource where I can find equivalent needle system descriptions or table. I have some information concerning the needle systems but I'm not sure if it is dated or what the popular equivalent might be. I've searched extensively online but I can't seem to find a good resource.

Let me know if you have any good ideas or linker, thanks.

 

[Needle System Confusion]

Recently new to the heavy duty sewing. I repair and modify hockey equipment but rely on leather or industrial sewing machines. I've acquired a Sears/Kenmore 158.504, as well as a Chinese Shoe Patcher (Singer 29k clone) and a Mercury M-120 (Singer 45k, SC-5, GA-5 clone). These allow me a certain level of speed and access as well as a increasing needle/thread size per application.

What I am having issues with is the Needle System and corresponding Needle Size. I found this table online and because I am using single needle heavy duty machines or equivalent should I be choosing needle sizes according to the 135x5 Needle system. I'm looking for some clarity so I don't purchase needles for the wrong system or that wouldn't fit the machines I am currently using.

Any assistance would be appreciated.