Wiccadwitch

Thanks everyone for the replies! while I appreciate the links to the manuals I already found the manual and parts list for the 29-4. Mine is however a 29-2. That wasn't a typo it is a 29-2. I even called singer in the hopes they had something not on the website in regard to manuals. The machines are very similar but there are a few differences and I do not know how far those differences extend in regards to inner workings. I know there are a few differences just externally that are pretty obvious. Anyway the info on the parts is very helpful. I really appreciate that. I am also glad to hear my stitch length isn't that bad. My reading indicated that it should get 5 so I was feeling that I needed to improve it further if possible. Hearing that my machine is actually doing well for his age is pretty nice. Cowboybob you mention part #82053 but I am not seeing that part # in the parts list can you perhaps tell me which page it is on so I can narrow it down at least? I'm sure I am just missing it but I've scanned the document multiple times and still not spotted it. Based on what I can see of the parts externally I am fairly sure that the parts of the head are virtually the same between the 29-2 and the 29-4 but without taking mine apart obviously I cant say with total certainty. that slideshow is fantastic though and might make me brave enough to actually risk dismantling my machine to check those parts(eventually if his stitches start getting into the intolerable range).

Hi, I know this is an old post but it is pertinent to my current situation. I have a 29-2 and I've been trying to get it serviceable. Currently I'm getting about 6.5 stitches per inch at best adjusted to the longest possible stitch length. Wizcrafts you stated in the previous comment about a part being savable depending on the amount of wiggle in the foot while raised(I have minimal motion so I am hoping this is the case for me). I'm just not clear which part you are actually talking about. Is it the regulator gib or the other part you mention that you describe as the inside "puck" that slides inside the ring under the head? Or is it something else entirely? Also if it is possible to get the actual part names for any of the elements that would effect stitch length(regulator gib being one) for reference if I consider replacement on any of them that would be ever so helpful. while a parts list for the 29-2 has been elusive I know many of the parts for other 29s are the same. On that note if there is anyone in this forum with an actual 29-2 manual or parts list I would be very grateful for a digital copy.