Eslyn

These are definitely "printed" in some fashion. They're not done by hand. These makers produce the same image over and over again. I don't have this in my possession, unfortunately. Definitely not stamped, there's too much variety in the offerings of these markers for stamps like that, and a lot of them will put whatever you want on it, so it would have to be done on the fly. If it was pyrography, it would have to be some type of automated thing for reproduction...Is that a thing?

I'll attach the image to this post, since linking it doesn't seem to be favorable. The closer makerspace to me is about an hour away, so no way that's really viable unfortunately. It would probably be cheaper for me in the long run to buy a cheaper engraver and see if I can get it to work than run back and forth, between gas costs and teh cost of using the makerspace itself. I've seen there are some pretty cheap engravers out there on ebay, for $100 or so, that can do a decent sized area. So it might be something I'll have to look at more. Ideally I'd love to be able to do larger images, but I know doing anything more than few inches wide is a pretty big, and expensive machine. At least from what I saw.

I've been googling and googling trying to figure this out with no luck. The best I can come up with is laser engraved, but from what I've seen those machines are pretty pricey, and most of the folks I see doing this are real small time or hobby and probably couldn't afford such an expensive machine to play around with as a business... Any ideas? Or is there some cheap laser engraver that I missed that can do stuff that's like 12x24"?