Midlandssewing

thanks Rahere but although the motors look the same the software is slightly diffrent and the parameters are in a diffrent place allso passwored protected to 2222 password need to find a Kaiser manual

hi i have a Kaiser i90m servo motor its basicly the same as a Ho Hosing i90m but there are some diffrences in the software so the Ho Hosing manual is no good dose any one have a manual as i only have a one sheet manual and its in Chinese has K.X. machinery co.ltd on it but cant find them on the net

midlandssewing@gmail.com did not seem to leve lines untill i put the new knife on had to be moved all the way back and it might just be it needs to ware away some of its self befor it can be ajusted just right dont normaly have a problem with fitting knifes and all ways use good quality knifes stone feed wheel looks good debured the inside with stone no visable wobble on the blade that i can see just wondered if part of the bush was worn and moveing it so far back it was in a worn part marked knife with pen and sharpend untill pen mark gose its not my machine i fitted it at a frends for him as i fix sewing machines normaly manuals are allway helpfull thanks for the help

no its to old very old fortuna lines going across the width of the skive at regular intervals

very old fortuna lines going across the width of the skive at regular intervals

thanks for the reply it seems sharp and i marked the knife with pen then sharpend untill all gone i was wondering if the bush was worn thanks for advise

haveing problems with my leather skiver machine getting lines along the skived area new knife on and sharpend but lines along the cut area about 3cm apart any advise please