Txjava

Many thanks Glenn

Hi team, Recently joined member. This site kept coming up in google searches. I recently bought a Juki LU-2210n-7 with an SC-922 and a Juki M51 servo motor. IT is very nice. When I got it is was wired for 3phase 240v. I rewired for 110v. It has air-powered reverse, Foot lifter, and auto thread cutting. It also has a CP-18 control panel. I've done a decent job of setting the timing and other adjustments I have some questions about programming the SC-922. Does anyone have experience? Specifically, I'd like to set it for needle down. (I've tried several settings and cannot get it to take.) Also, once needle down is set, is there a way to program it to step between needle up and needle down. maybe reprogramming one of the other buttons. I'm also a bit lost programming the options under Function Setting No. 12 in the manual https://www.manualslib.com/download/1251852/Juki-Sc-922.html I admire all your work and how helpful you are for each other. A shoutout to Uwe Grosse, Parker Linchfield, and Jason Potts for their Youtube Videos. @jasonpotts42 @Uwe @stockandbarrel Cheers, ~Terry