Jump to content

Clackdaddy

Members
 View Profile  See their activity

  • Content Count

    2

  • Joined

  • Last visited

Posts posted by Clackdaddy

  2. Posted · Report reply

    On 12/4/2018 at 1:09 PM, fredk said:

    I just measured round my own hat; its a 56 cm head size. Around the outside of the crown is exactly 60 cm

    My hat bands I make are like belts with a buckle. The end with adjustment holes; 4cm to go thru the buckle and keeper is not too much. It allows a couple of extra holes at 1 cm intervals for a slightly larger diameter crown. 3 cm is too little and above 5cm looks too ungainly. 

    On the other end for the buckle a fold around of 4cm is modest. It can be less, but at 4cm there is room for a keeper to be sandwiched

    Tandy sells ready cut hat-band straps. The straps are pre-punched for main fittings. They are 3/8" wide. 74 cm long and the fold around the buckle is 6cm [74 - 6 = 68cm nominal hat band]

    I came on here just to see if I could find this info(though I guess I might have found it on Tandy’s site now that I think about it), Thanks!

×
×
  • Create New...