mjvkop

Here is an image of the piece that is binding the casting. I was reading through this thread, which made me stumble upon the difference between the juki presser foot adjustment and the singer 111w. See specifically the posts from March 1st, and the reference to the singer 111w manual.

After tinkering with the machine for a while today, I realized that the issue was that the upper feed arm that connects to the presser foot adjustment bar is binding against the casting at the top of its stroke. To adjust for this I assume I need to adjust the worm gear that controls the motion of this arm, but I was under the impression that you only needed to do that on the singer 111 class machines, not the juki and consew clones. I’ll try to upload a picture shortly.

Thanks for the response Constabulary, is this something that can be adjusted?

Hi all, I have a Juki LU-562 that I use to sew heavy fabrics and leather, as well as foam, and have a question I'm hoping this forum can help me with. I cannot seem to adjust the height of the presser foot higher than about half-way to the maximum height adjustment. When I try to adjust it higher than that, it feels like their is some sort of mechanical stop within the machine that is preventing it from progressing prior to the needle entering the fabric. Any help with this is greatly appreciated!!