CyberBadger

Update! I feel a bit dumb now.... Thanks to the manuals, some photos and a helpful video on another forum, I discovered that the previous owner probably had the incorrect needle size. I lowered the needle by 5mm or so and it seems to work!! Now I feel a bit dumb... As I understand, the machine should take System 88 needles, so I have ordered some to try. And the shuttle is still quite worn, so I will see if the Singer 29k ones fit, as a few people reported having success. But otherwise this should work to start out with!

I emailed you a few I found recently as well

PM sent, thanks! Hoping I can find the proper bobbin case somewhere if that's indeed the issue...

Hi all - I've wanted to get back into leatherwork and recently picked up a small patcher with the intent of using it for smaller home projects. It seems to have been well-maintained, and was in use by an older gentleman until relatively recently. I believe it might be a Kochs Adler 'Universal Elastic' - at least 'Universal' is visible on the paint remnants. Unfortunately I'm worried I may have overpaid as I cannot get it working properly. I'm a bit limited with what's locally available as I don't have a car & I wanted something smaller that doesn't rely on electricity, but I'm hoping I didn't make a mistake here... I thought that it was just incorrectly threaded - but now I'm wondering if the bobbin cases are wrong. It came with 3 which are slightly different sizes. The darker coloured one is, I believe original, and slightly shorter than the other two. None of them seem to glide close enough on the left side to hook the thread. Any information or help would be greatly appreciated!