greatwhitetrading

Hello fellow leather workers. I have a seiko skz-6b for sail making and the needles that came with it are for leather work, DDX2. Don't need leather point cutting the sail cloth. My question is, what round point needle is the equivalent? Thank you in advance!

Have it all straightened out now. These are amazing machines.

I have a Pfaff 3334 for making box x tacks to affix my leather straps to waxed canvas. The x axis adjustment is straight forward in the manual. The issue is the y axis adjustment. The manual is not very clear regarding the adjustment of tack length along the y axis. Any help would be greatly appreciated.

I believe that the feed eccentric might be worn as the forward reverse and lift are static and not independantly movable.

Feed dog does come forward and meet the needle and walking foot, it's not out of time, it sews. The issue is the feed dog and walking foot are too low in the throat plate at the beginning of the stitch. The feed dog does come up above the plate later in the cycle.

I have a 153w103 and its sews well, the issue I have is that the feed dog and walking foot meet below (almost 1/4") the needle plate, which pushes the material (chrome tan leather and canvas) down into the needle plate. Is this normal or is it something simple like ordering a thinner needle plate? I raised the feed dog height, but all that did was make the material lift higher in the back and seemed to put more stress on the walking foot. Please find link below for the short video I made showing the issue.