Jump to content

skiibar

Members
  • Content Count

    8
  • Joined

  • Last visited

Everything posted by skiibar

  1. I found the proper top threading pictures on here , would anyone have pictures of the proper way the bobbin is to go and thread routing. Currently after two stitches it binds up underneath. I am holding the top and bottom thread when I start. Thanks
  2. If I try and feather the motor it squeals
  3. it is a 1/2 hp Clutch motor so I am guess feathering practice it is
  4. Ok i got everything working , proper belt installed , however it 100mph or nothing
  5. Next step , I have these two peices that fell off the machine when I was bringing it home O am not sure of their place or purpose
  6. I have a 593 and currently there is a leather belt on it, I am unable to get it tight enough that it does not spin or pull apart . I have to start the machine with one hand then the belt will turn the machine . I am assuming this is not the correct belt for this model.
  7. Would anyone have a picture of the belt , mine is a cord and just spins , I can't get the motor tight enough without pulling the belt apart
×
×
  • Create New...