Mats

It seems that the G style does not work in my machine. It is lower than the 233939 causing the bobbin case to sit too low. It seems to be causing problems on my machine . The 168W bobbin is supposed to be 30/64's in height. I found a listing on ebay actually, so I will let you know how it works out. thanks anyway guys:-) Mats

thank you very much Ill look at both suggestions and see where it takes me:-) Mats

Hi! Im new to the forum and also rather new to the leatherworking in general. I have got a nice 168w101 post bed machine that I have cleaned and got it working nicely. However it came only with 1 bobbin.. it is sensetive to have the correct bobbin due to how it sits in the shuttle etc. I have failed to source someone who sells these aftermarket. Does anyone have a tip where I can find these bobbins? Or maybe someone on the forum have a excess amount of these laying about? I have attached a drawing, as you can see it has flared sides and is rather tall. part nr. according to a old pdf i looked up. 233939 plate 17253? thank you very much Mats Andersen, Norway