[Singer 168w101]

It seems that the G style does not work in my machine. It is lower than the 233939 
causing the bobbin case to sit too low. It seems to be causing problems on my machine . The 168W bobbin is supposed to be 30/64's in height.
I found a listing on ebay actually, so I will let you know how it works out.  thanks anyway guys:-)

 

 

Mats

[Singer 168w101]

thank you very much

Ill look at both suggestions and see where it takes me:-)

 

 

Mats

[Singer 168w101]

Hi!

Im new to the forum and also rather new to the leatherworking in general.

I have got a nice 168w101 post bed machine that I have cleaned and got it working nicely.

However it came only with 1 bobbin.. it is sensetive to have the correct bobbin due to how it sits in the shuttle etc. I have failed to source someone who sells these aftermarket.

Does anyone have a tip where I can find these bobbins? Or maybe someone on the forum have a excess amount of these laying about?

 

I have attached a drawing, as you can see it has flared sides and is rather tall.

 

part nr. according to a old pdf i looked up.  233939

plate 17253?

 

thank you very much

Mats Andersen, Norway