Georgi

Hello! Thank you for replies. Yep, I am in Bulgaria, Europe. We have VEVOR in here. I ordered all the tools from Germany, USA (amazon) and China (Kemovancraft & Owden) so far. May be I mislead you by saying 1.5 sq. m. I meant - that is the space I am using for leather crafting for now. I want to make small goods like wallets so the sizes of dies would be up to 18 cm. The leather I have for that kind of projects is 3-5 Oz. veg tan. By the formula I calculate 1 ton arbor press would be enough for now. Thank you!

Hello! I've been researching all the leather cutting options for a while now. So I am new at leathercrafting but I would like to find a way to make perfect cuts so I could make good products. I have very little space - 1.5x1.5 sq.m. and I need a little machine for that purpose. The options I researched are as follows: Laser To use a laser for cutting skin, it is necessary that the laser has a power of at least 10 watts. Mandatory should be added air assist to get less skin burns, encloser, as well as perfect ventilation. My space is easy open air area and I would not have problem with ventilating. Lasers that would work for me are the following: Wainlux K8 - That would be the best option due to size and portability. The big downside is the working area /130x130 mm maximum/; Longer Ray5 10 W - may the best option for me. Ortur LM3 Laser Ortur LM3 LE Laser Engraving & Cutting Machine Atomstack X12 Pro Atomstack P9 M50 xTool M1 10W - best quality. May be the first laser and also with blade for cutting. CNC with drag knife - looks good but very big and loudly. Not compatible for me. Cricut Maker 3 & Cameo 5 - both look amazing. They can cut leather but I don`t know. i would like to know your opinion about that those two. Sizzix - I find on amazon "superdant" store. There cutting dies for leather which work with sizzix - 1/2/3/4 . But that`s it. I don`t know if they can make it custom patterns and I have doubts for the quality. Clicker press - I think that would be the best option for me to buy low cost clicker press. I was looking that ones by vevor: 1/2/3 . I have problem with their weight - around 30-40 kg. I was looking for a smaller by zonesun like that ones: 1/2/3 - but I would by a machine for 120-200 $ and pay 200 $ shipping .... Arbor press - looks good for 50-100 $ I could buy an arbor press 1 or 2 tons. But than I have to order a base and the only good option I found is that one - link . The cost is 120 $ without taxes and shipping so no thanks. I would like to start with wallets and small stuff - no bigger than a medium bag. I try to cut by hand but the finish is not good enough for me. I don`t like it and got frustrated. I'm already seriously confused about which path to choose to start with. I ask for your opinion.