Search the Community

Hi all, I've been using Tandy's dyes and conditioners along with some Fiebing products for years. The gel antique finishes have served me well for quite some time. My dyeing technique is simple. Tool, clean leather, dye backgrounds (and any other desired detail portion) let dry overnight, then apply antique finish by rubbing it on, then as it dries continuing to rub it removing any excess and "buffing" the color. After it dries overnight, I apply multiple coats of either satin of super sheen: 4 - 5 being normal with at least 4 hours between. (I live in the desert. Things dry very fast.) I completed a clutch purse that has a strap attached for one of my customers. I used my standard dye technique on it (similar to that which has been used on probably close to a dozen other clutch purses). This purse had the stamped down background dyed Bison Brown and then antique mahogany rubbed in. I haven't used the mahogany much, but it's what the customer wanted. For whatever reason the dye/sealing has not worked properly. First in just regular use (over the shoulder while walking/moving) the dye/finish wore thru to the leather where it rubbed against her belt/jeans. I took it back, repaired the dye in the worn areas, rubbed everything out hard, and applied 4 coats of satin sheen with longer wait times. Now she's reporting that the dye color is rubbing off on her clothes and has to carry the clutch in her larger bag which of course defeats her whole reason for buying the piece. If necessary I'll tool her a completely new one and not use an antique gel, but I'm hoping that some one here - more expert than myself - can suggest a solution. As I noted, I've used this approach quite a number of times (100's?) without encountering the dye rubbing off problem. She's one of my best customers and her word of mouth praise has been invaluable so while I make it right for any customer, I'm particularly concerned about getting her purse fixed. I've read several threads here about dyeing. Obviously there are a number of ways to do it. My work is all carved and/or stamped so there's no dipping or spraying taking place. Help would be greatly appreciated. Robert