Search the Community

Hello all: I am currently working on a DIY project that has been troubling me for a while now. My objective is to take two individual strips of leather and glue them together, and give the outside layer a glossy surface finish, creating a full wrist sized bracelet that is supposed to be sewn onto the cuff of a normal hoodie. The leather is supposed to be sewn onto the hoodie permanently and never removed. Meaning the leather strip applied will need to be 100% waterproof. for 20+ years. Essentially no coatings or chemicals made for leather are both 100% waterproof and durable enough to protect the leather of consistent water abused when laundry is done biweekly on average. so in conclusion I have turned to the Liquid Latex solution that is used for making stretchy clothes, and never breaking. my question is A) has anyone used liquid latex on leather that was painted with acrylic paint, and then once the latex dried with a glossy finish, you bent and manipulated the leather and saw the paint crack beneath the sealed surface of liquid latex? B ) I want to clean the leather before painting it but i don't know if any chemicals will cause the latex to not stick to the leather, as i have seen posts on here of people using liquid latex specifically to protect areas of their leather and then peel the liquid latex off of the leather surface afterwards, I'm hoping to apply a few coats of this stuff, and once dried I hope god himself cant pry it off of the leather. does anyone know if it works well or not? C ) I have noticed some different brands of latex around and i didn't know which one would work best on leather. any recommendations? D ) If I end up applying the latex to the rubber and it works great I don't know if I should puncture the seal and sew the leather strip to my sweater afterwards, or possibly glue the leather together, paint it, sew it to the sweater. then tape off the part of the sleave i don't want thew latex touching, and then the coat the leather so the sewing thread stays in place and is protected. thank you for all the help it means a lot as i have no clue what I'm doing thus far, thanks! I attached photos of the project below.

Hello all: I am currently working on a DIY project that has been troubling me for a while now. My objective is to take two individual strips of leather and glue them together, and give the outside layer a glossy surface finish, creating a full wrist sized bracelet that is supposed to be sewn onto the cuff of a normal hoodie. The leather is supposed to be sewn onto the hoodie permanently and never removed. Meaning the leather strip applied will need to be 100% waterproof. for 20+ years. Essentially no coatings or chemicals made for leather are both 100% waterproof and durable enough to protect the leather of consistent water abused when laundry is done biweekly on average. so in conclusion I have turned to the Liquid Latex solution that is used for making stretchy clothes, and never breaking. my question is A) has anyone used liquid latex on leather that was painted with acrylic paint, and then once the latex dried with a glossy finish, you bent and manipulated the leather and saw the paint crack beneath the sealed surface of liquid latex? B ) I want to clean the leather before painting it but i don't know if any chemicals will cause the latex to not stick to the leather, as i have seen posts on here of people using liquid latex specifically to protect areas of their leather and then peel the liquid latex off of the leather surface afterwards, I'm hoping to apply a few coats of this stuff, and once dried I hope god himself cant pry it off of the leather. does anyone know if it works well or not? C ) I have noticed some different brands of latex around and i didn't know which one would work best on leather. any recommendations? D ) If I end up applying the latex to the rubber and it works great I don't know if I should puncture the seal and sew the leather strip to my sweater afterwards, or possibly glue the leather together, paint it, sew it to the sweater. then tape off the part of the sleeve i don't want the latex touching, and then the coat the leather so the sewing thread stays in place and is protected. thank you for all the help it means a lot as i have no clue what I'm doing thus far, thanks! I attached photos of the project below.