Members TheMortgageGuy Posted June 17, 2022 Members Report Posted June 17, 2022 (edited) Hello experts with more knowledge than me.. I recently bought a tacsew cg6-6 for my uncle. Cheaper walking foot with top feed bottom feed but no needle feed… great stitches in top and bottom. I had to adjust the hook timing but all good now . The issue is with reverse. my stitch length is 1/3-1/4 the length of the top stitch.. there is no simple fix to correct. I have seen a video where potentially the back plate on the back of the machine behind the stitch length adjuster,,,,there is a a set of adjusters for both forward and reverse stitch length…. Has anyone done this successfully? In a Juki or consew or tacsew? Edited June 17, 2022 by TheMortgageGuy Spelling error Quote Juki Lu563 with Servo, Singer 20U with Enduro SM 645B, Pfaff 142-6/2. BL, PFAFF 335-H3-6/01-900/52-BLN
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.