Brooksie Report post Posted June 22, 2023 SO.... after moving a clicker into a new space followed by landscaping to ensure it stays put for a while, I discovered it giving me about 1 ton of pressure. Pulling off the oil bath cover and cycling it with a light load on cutting table it squirted oil from the bottom of the main cylinder. With a bigger load it shot out like a pressure washer. These old Italian clickers are no longer made but I would like any help I can get. I'm hoping to find a lower seal or possibly both since it all has to come apart. Please, does anyone know of an outfit that has advice or seals for this old workhorse. Peace out. James Quote Share this post Link to post Share on other sites
