Jump to content

Recommended Posts

  • Members
Posted (edited)

hello all , 

 

a question about a "new" to me , Pfaff 474 post bed sewing machine , the machine looks like it is altered by the previous owner (the top roller system doesn't seem original to me). it's fitted with a Efka euramot AB62CV1466 , al seems to work as it should do , except i can't find a reserve lever/button .

so am i right in thinking the reverse is controlled by the Efka motor control ? if so , how does that work (if you reverse the motor the bobin would turn the wrong way round )

i don't see anything electrical that would reverse the bobin , only solenoid is for a (now defunctional) thread cutter .

next to the column is a little switch board with 2 buttons (red and yellow) and a small toggle switch above it , nothing seems to work from that control box , so i need to see if there's a wire damaged .

 

20241230_231357.thumb.jpg.25b124a2977a6a4c0dfca22c92d5c7f9.jpg

 

Edited by Hurbie

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...